Which Way To Go

Transport law, news & explainers

Independent Australian transport journalism and plain-English reference guides built from primary sources.

What should a site do when an unsafe or overloaded truck arrives?

Short answer

Assess the immediate risk, protect people and contact the operator to arrange a safe response. Automatically refusing entry may push the problem onto the road; allowing entry or moving the vehicle must also be safe and lawful.

JurisdictionQLD, NSW, ACT, VIC, TAS, SA
Last checkedOctober 24, 2026
StatusCurrent

Plain English

Respond safely to an unsafe arrival
Protect Keep people clear of the hazard
Assess Identify the risk and safe options
Coordinate Contact the operator and competent help
Escalate Seek appropriate assistance and record the response
Choose a response that reduces risk at the site and on the road. Visual guide: WWTG.

A shifted load, damaged restraint or suspected overload needs a response suited to the problem. A gate sign saying “non-compliant vehicles refused” does not resolve every arrival safely.

NHVR guidance describes circumstances where a nearby safe area, preferably on site, may allow a vehicle to be separated from workers and the public while help is arranged. It also recognises that a site may lack the facilities or equipment to assist.

Consider the risk created by the proposed response. Do not direct an unsafe vehicle to continue on a public road simply to move the problem elsewhere. Equally, do not undertake an unload, repair or vehicle movement beyond the site’s capability.

CoR duties do not by themselves give site staff powers to seize keys, detain a driver or forcibly stop a vehicle leaving. Seek appropriate assistance where the risk cannot be managed cooperatively.

These requirements apply in ACT, NSW, Queensland, South Australia, Tasmania and Victoria, subject to the law as applied in each jurisdiction. WA and NT have separate laws; cross-border businesses must check both regimes.

What this means operationally

As a practical response:

  1. Keep people clear of the hazard and pause the affected site activity where needed.
  2. Speak with the driver and responsible site supervisor. Identify what is observed and what is only suspected.
  3. Contact the operator and agree suitable assistance: for example, competent load adjustment, repair or recovery.
  4. Check that any proposed holding area, movement or unloading operation is safe, lawful and within the site’s capability. Obtain advice where uncertain.
  5. Escalate an imminent serious danger to the appropriate emergency or enforcement service.
  6. Record the facts, contacts and response; review recurring problems with the supplier or carrier.

These practical recommendations are not prescribed forms or a guarantee of compliance. General information, not legal advice.

Who it applies to

Warehouses, customers, loading and unloading sites, weighbridges and other businesses receiving heavy vehicles.

Example

Hypothetical example: A delivery arrives with a visibly shifted load. Staff keep workers clear and contact the operator about competent assistance. They do not immediately send the truck back down the road or start unloading without a safe method.

Exceptions and traps

A weighbridge ticket or dispatch instruction is not permission to drive an overloaded or unsafe vehicle away.

Sources & primary documents

WWTG verification: Queensland Legislation (published law), NHVR (published guidance)

Frequently asked questions

Must we admit every non-compliant truck?

No. Assess the risks, available facilities and reasonably practicable response.

Can we forcibly hold it until the problem is fixed?

Do not assume CoR gives you that authority. Involve the appropriate authority where necessary.

Must every suspected breach be reported?

This article does not establish a universal reporting duty. Imminent danger, specific legal requirements and recurring non-compliance need appropriate escalation.