Which Way To Go

Transport law, news & explainers

Independent Australian transport journalism and plain-English reference guides built from primary sources.

When does waiting at a loading site count as rest?

Short answer

Waiting is not automatically work or rest. Look at what the driver is doing, the applicable legal definition and the kind of break required. A label on a booking system does not decide the answer.

JurisdictionQLD, NSW, ACT, VIC, TAS, SA
Last checkedOctober 24, 2026
StatusCurrent

Plain English

Check the break the driver actually had
Activity Was the driver doing vehicle-related work?
Break type Does the rule require rest or stationary rest?
Continuity Was the break interrupted by work?
A booking label does not decide whether time is rest. Visual guide: WWTG.

There is a difference between being released from duties in a suitable waiting area and continuing to handle freight, supervise loading or move a vehicle through a queue.

Even where time qualifies as rest, a requirement for continuous rest or stationary rest needs a separate check. Under the general definition, stationary rest involves being outside the fatigue-regulated vehicle or in its approved sleeper berth while it is stationary. Simply parking and sitting in the driving seat is not the same test.

There is also a NSW-specific rule concerning a stationary driver’s-seat period with the engine running. Under NSW s 248A, the vehicle must remain stationary, the driver must not be subject to work demands, and the period must last at least 15 minutes or form part of a rest period of at least 15 minutes. Do not turn that qualification into a national rule or assume it satisfies every type of required break.

This explainer concerns the HVNL in ACT, NSW, Queensland, South Australia, Tasmania and Victoria, subject to local application and modifications. WA and NT have separate regimes. Cross-border operators must check the rules applying to their journey.

What this means operationally

Sites and carriers can make waiting arrangements clearer by agreeing:

  1. Where the driver can safely park and take a break.
  2. Whether the driver is released from loading, supervision and other tasks.
  3. How the site will notify the driver when work is ready.
  4. How work interruptions will be recorded and the onward plan reassessed.

Ask what actually happened during the period. A promised hour off can become a series of interrupted intervals if the driver keeps returning to work.

These are practical suggestions, not prescribed compliance forms. General information, not legal advice.

Who it applies to

Drivers, loading and receiving sites, operators and schedulers.

Example

Hypothetical example: A site provides a rest area, but calls the driver back to assist with the load. The driver records the actual change of activity; the original booking description does not make the whole interval rest.

Exceptions and traps

“Not driving”, “rest” and “stationary rest” are not interchangeable descriptions.

Sources & primary documents

WWTG verification: Queensland Legislation (published law), NHVR (published guidance), NSW Legislation and NTC (NSW variation)

Frequently asked questions

Can a loading site provide an opportunity to rest?

Yes. The arrangements and actual activity must support the relevant break.

Can separate interruptions simply be ignored?

No. Assess the actual periods against the applicable counting and continuity requirements.

Does an engine-off rule settle the issue?

No. A driver can still be working with the engine off.